CapMeter - capacity meter

CapMeter V2.1 - capacity meter for Arduino.

Capacity meter with automatic selection of the measurement range. It measures the charging and discharging times of the capacitor, and converts the measured values into capacitance.

The measured capacity is from 10pF to 10mF (10000uF).

A one-time meter calibration is required. For calibration, you need to turn on the meter with the calibration button pressed. Then connect the reference capacitors, the value of which is indicated on the display. The connection of each capacitor must be confirmed by pressing the calibration button. The values ​​of the reference capacitors can be changed in the "set calibration caps" section.

Information is output to an external display and to a serial port. Customize the code for the display you are using (U8X8_ON and I2C_LCD_ON macros).

Warning! The capacitor must be completely discharged before measurement. Otherwise, the device may be damaged.

  

 

It is recommended to put such protection on the input.

Version 2.1 - added support for various displays.
Version 2.0 - added calibration.
Version 1.0 - first release.

 

Download Sketch: CapMeter V2.1

Download Sketch: CapMeter V2.0

 

Download Sketch: CapMeter V1.0

 

---

SigmaCalc - Calculator

SigmaCalc (V1.8) - Accounting Calculator.

 

Values can be entered and copied from the display by clicking on it.

 

Version 1.8 - display bug fixed.
Version 1.7 - display and markup bugs fixed, root modernization.
Version 1.6 - root bug fixed.
Version 1.5 - root bug fixed.
Version 1.4 - root bug fixed.
Version 1.3 - memory bug fixed.
Version 1.2 - markup bug fixed.
Version 1.1 - bugs fixed.
Version 1.0 - first release.

Download:
Win EXE, 32/64-bit: SigmaCalc V1.8

Win EXE works on Linux and macOS with Wine.

 

tags: calculator, mu, markup, mark up, tax, cost, sell, calculator

FilesComparator

FilesComparator (V1.3)

 

This program allows you to compare all files in two folders.

 

Version 1.3 - added a progress bar.
Version 1.2 - difference search bug fixed.
Version 1.1 - files search bug fixed.
Version 1.0 - first release.

Download:
Win EXE, 32/64-bit: FilesComparator V1.3

Linux Debian, 64-bit: FilesComparator V1.3 Debian
 

Win EXE works on Linux and macOS with Wine.

 

 

--- 

tags: file difference, files comparator

IRbis - Cabinet Simulator

IRbis VST (V2.0) - IR Cabinet Simulator.

 

The impulses can be mixed, placed in series or in parallel.

To load a file, click on the information line.

Version 2.0 - the possibility of using two impulses.
Version 1.0 - first release.

Download impedance curves: IC

Download:
Win VST, 32/64-bit: IRbis V2.0 Win VST
Win VST3, 32/64-bit: IRbis V2.0 Win VST3

Linux Debian VST, 64-bit: IRbis V2.2 Debian VST

--- 

tags: impulse response, IR loader, IR player, convolution

Detective - Puzzle

Detective (V1.2) - Einstein-style puzzle game.

 

 

Detective is an Einstein-style puzzle game. The goal is to open a field of 6x6 squares using the hints.

Version 1.2 - bug fixed and double closing hints.

Download:

Win EXE, 32/64-bit:  Detective V1.2

Linux Debian, 64-bit:  Detective V1.2 Debian

Win EXE works on Linux and macOS with Wine.

---

Ratio Meter - Tester

Ratio Meter VST (V1.0) - Compressor Test.

 

Instructions for using the plugins.
Assemble the sequence: Ratio Generator, Compressor, Ratio Meter. On the Ratio Meter, press Reset. On the Ratio Generator, press Start. After stopping the generator, use the cursors to measure the ratio and threshold of the compressor.

 

Download:
Win VST, 32/64-bit: Ratio Meter V1.0

---

Bass - Amp

 Bass VST/AU (V1.1) - Bass Guitar Tube Amp.

 

Ampeg SVT-CL style.

Note: After this amp simulator, you need to put the cabinet simulator (IR).

Controls:
Input - input level switch
Gain - input level knob
Ultra Low - tone switch
Ultra High - tone switch
Bass - tone knob
Midrange - tone knob
Frequency - midrange frequency knob (works like a five-position switch)
Treble - tone knob
Master - output level knob
Stereo -  mono or stereo switch


Oversampling 8x.

Version 1.1 - tonestack correction.
Version 1.0 - first release.

Download:
Win VST, 32-64-bit: Bass V1.1

MacOSX VST & AU, 32-64-bit: Bass V1.1 VST+AU

---

NC2 - Compressor

NC2 - Compressor, VST & AU (V3.1)

 

 

Controls:
Threshold (knob) - compression threshold;
Make Up (knob) - output gain;
Attack (knob) - envelope attack time;
Release (knob) - envelope release (recovery) time;
Ratio (knob) - signal reduction level above the threshold;
HP SC (switch) - high pass filter (100 Hz) of side chain;
GR - gain reduction indicators;
Output (switch) - overload protection type, clipper or limiter at 0 dB (overload indicators are located at the edges);
Separate Control (switch) - separate control of the left and right channels;
Stereo (switch) -  mono or stereo input;


Version 3.1 - oversampling up to 32x.
Version 3.0 - oversampling 4x is added.
Version 2.0 - Ratio knob is added.
Version 1.0 - first release.

Compressor test

Download:
Win VST, 32/64-bit: NC2 Compressor V3.1

Mac OSX VST+AU, 32/64-bit: NC2 Compressor V3.1 VST+AU

Download:
Win VST, 32/64-bit: C2 Compressor V2.0

MacOSX VST & AU, 32/64-bit: C2 Compressor V2.0 VST+AU

 

---

Noise Katana - Noise Suppressor

Noise Katana VST & AU (V1.0) - Dynamic Noise Suppressor.

Controls:
Sensitivity - sensitivity knob
Stereo -  mono or stereo switch (in the upper left corner)

Instructions for using the plugin.
Set the Sensitivity knob to maximum (far right) and decrease the sensitivity until you stop hearing noise during pauses. If noise is also heard in the desired signal, then you need to further reduce the sensitivity of the noise suppressor.

 

Download:
Win VST, 32-64-bit: NoiseKatana V1.0

Mac OSX VST+AU, 32-64-bit: NoiseKatana V1.0 VST+AU

---